Group

Frequently Asked Questions

Routing Accessories FAQs

Frequently Asked Questions about Routing Accessories

The trend guide bushes are 60mm in diameter and the screw centres are 50mm.

... Read more

Yes, the Trend range of GB guide bushes will fit straight on to either machine.

... Read more

The guide bushes have a wall thickness of 1.5mm, therefore reducing the internal diameter by 3mm. To allow for waste, the guide bush wants to be about 6mm larger.

... Read more

Yes they do, however a M5 nut and bolt is required to fasten them to the base of the router.

... Read more

Please check our compatibility chart. A UNIBASE or sub-base may be required depending on the make and model.

... Read more

No, the 1/4 collet is actually 6.35mm, a difference of .35mm which is critical in terms of collet and shank sizes.

... Read more

The part numbers are: CE/127127 & CE/127635.

... Read more

Trend can offer the T10 collets which will fit the Elu heavy-duty routers. Elu collet E40102 is Trend ref CLT/T10/635 (1/4 inch), E40103 is Trend ref CLT/T10/8 (8mm) and E40107 is Trend ref CLT/T10/127 (1/2 inch).

... Read more

We do a range of replacement collets which are: 1/4" - CNS/T5/635 & 8mm - CNS/T5/8.

... Read more

The dimensions of the router plate is 306mm x 229mm x 6.35mm.

... Read more

We do a large range of replacement collets which are:|3mm CLT/T10/3|6mm CLT/T10/6 |1/4" CLT/T10/635|8mm CLT/T10/8|3/8" CLT/T10/95|10mm CLT/T10/10|12mm CLT /T10/12|1/2" CLT/T10/127.

... Read more

It will fit, if the T10 collet nut is used as well.

... Read more

A sleeve will fit on to the shank of the cutter to increase the shank size, where as a collet will fit into the router to enable different shank sizes to be inserted in to the router.

... Read more

There are a range of fine height adjusters available for a variety of routers. FHA/001 will fit Trend T5, Elu MOF96(E), Dewalt DW613, 615, Perles OF808(E), Draper R850V, Nu-tool NPT850, Power Devil PDW5027, Virutex FR78(C) and Wickes 900W.

... Read more

Yes, the Trend FHA/001 fine height adjuster can be used.

... Read more

The T10/T11 trammel bar and attachment can be used on any router that uses a 10mm diameter fence rod.

... Read more

The UNIBASE is required.

... Read more

The T5 beam trammel or attachment can be used on any router that uses an 8mm diameter fence rod.

... Read more

The UNIBASE is required.

... Read more

The UNIBASE is required.

... Read more

The thickness of the Trend Unibase is 8mm.

... Read more

Part number is UNI/PIN/1.

... Read more

Part number is UNI/PIN/1.

... Read more

The neck depth is 10mm.

... Read more

Slotseal Carripile is not available from Trend. Carriplie II was made originally made by Slotseal. Reddiseals offer a similar centre leg pile carrier.

... Read more

Schlegel Engineering, Henlow Ind Estate, Henlow Camp, Bedfordshire, SG16 6DS Tel no. 01462 811963.

... Read more

The outside diameter is 60mm.

... Read more