Group

U*VJS/TG/JIG - Varijig Tenon & Grooving Jig

U*VJS/TG/JIG
CA$326.52

Stock Level In Stock

Allows grooves and tenons to be cut using a router.

  • Can be used to crosscut boards with a router or circular saw.
  • Frame is adjustable to allow narrower or wider grooves to be routed.
  • The max. adjustment is 2 3/4 inch depending on the diameter of the router base.
  • The edge of the frame can be used as a guide to trim a panel square using a router.
  • Two sliding stops to set groove length.
  • Squaring butt has the facility to accept a spelch block to allow a full-length groove.
  • Fixing screws are included for this purpose. Working length is 15 3/4 inch.
  • Use with a router with a guide bush with a minimum 5/16 inch projection fitted.
  • Router not included.

no spare products

Product Questions

Write Your Own Question
Your Question: